请教大佬X-ui如何一拖二链式

镖师 · 发表于 2024-1-21 12:43:13

马上注册，免费下载更多dz插件网资源。

您需要登录才可以下载或查看，没有账号？立即注册

×

是这样，机子在US，需要拉SG专门看流媒体，但除此之外其余情况比如google啥的需要走UA，相当于US纯拉后面俩，全程US不用，就是一个一拖二的链式，在v2我会，但最近换X-ui在配置里怎么改都不生效，请教大佬！

{ "api": { "services": [ "HandlerService", "LoggerService", "StatsService" ], "tag": "api" }, "inbounds": [ { "listen":"127.0.0.1", "port":1089, "protocol":"socks", "tag": "in", "settings":{ "udp":true } }, { "listen": "127.0.0.1", "port": 62789, "protocol": "dokodemo-door", "settings": { "address": "127.0.0.1" }, "tag": "api" } ], "outbounds": [ { "protocol": "freedom", "settings": {} }, { "protocol": "blackhole", "settings": {}, "tag": "blocked" }, { "tag": "给流媒体专门走一个", "protocol": "vmess", "streamSettings": { "network": "ws", "security": "tls", "tlsSettings": { "allowInsecure": false }, "wsSettings": { "path": "XXX" } }, "mux": { "enabled": true, "concurrency": 8 }, "settings": { "vnext": [ { "address": "XXX", "port": XXX, "network": "tcp,udp", "users": [ { "id": "XXX", "security": "auto", "alterId": 0 } ] } ] } }, { "tag": "其他的走这个", "protocol": "shadowsocks", "settings": { "servers": [ { "address": "XXX", "port": XXX, "method": "XXX", "password": "XXX", "ota": false, "level": 1 } ] } } ], "policy": { "levels": { "0": { "handshake": 10, "connIdle": 100, "uplinkOnly": 2, "downlinkOnly": 3, "statsUserUplink": true, "statsUserDownlink": true, "bufferSize": 10240 } }, "system": { "statsInboundDownlink": true, "statsInboundUplink": true } }, "routing": { "rules": [ { "inboundTag": [ "in" ], "type": "field", "outboundTag": "给流媒体专门走一个", "domain": [ "geosite:netflix", "geosite:disney" ] }, { "inboundTag": [ "in" ], "outboundTag": "其他的走这个", "type": "field" }, { "ip": [ "geoip:private" ], "outboundTag": "blocked", "type": "field" }, { "outboundTag": "blocked", "protocol": [ "bittorrent" ], "type": "field" } ] }, "stats": {}}

复制代码

©DZ插件网所发布的一切资源仅限用于学习和研究目的；不得将上述内容用于商业或者非法用途，否则，一切后果请用户自负。
网站部分内容来源于网络，版权争议与本站无关。您必须在下载后的24个小时之内，从您的电脑中彻底删除上述内容。如果您喜欢该程序，请支持正版软件，得到更好的正版服务。
您在本站任何的赞助购买、下载、查阅、回复等行为等均表示接受并同意签订《DZ插件网免责声明协议》。
如有侵权请邮件与我们联系处理: discuzaddons@vip.qq.com 并出示相关证明以便删除。敬请谅解！

浅生 · 发表于 2024-1-21 12:44:06

{ "protocol": "freedom", "settings": {} }, { "protocol": "blackhole", "settings": {}, "tag": "blocked" },

独家记忆 · 发表于 2024-1-21 12:44:31

上面删除试试

浅生 · 发表于 2024-1-21 12:45:05

这样分出去了，但很奇怪，我模拟UA离线情况，最后所有的流量走了SG，感觉routing写的还是不对

独家记忆 · 发表于 2024-1-21 12:45:42

outbounds_1
outbounds_2
outbounds_3
1当默认代理us
2当sg
3备用
大概思路就是这样
routing里面指定域名走1还是走2
   {
      "type": "field",
      "domains": [
      "domain:baidu.com",
      "domain:qq.com",
      ],
      "outboundTag": "outbounds_1"
   },
   {
      "type": "field",
      "domains": [
      "domain:baidu.com",
      "domain:qq.com",
      ],
      "outboundTag": "outbounds_2"
   },